Do you play golf? If yes, you know the importance of a good golf iron. Sometimes, the shaft of the golf iron breaks. What do you do? You reshaft the golf iron. It is not hard. You can do it yourself. Follow these simple steps.
Why Reshaft a Golf Iron?
A broken or damaged shaft affects your game. You may miss shots. The club may feel strange. Reshafting can fix these issues. It makes the club feel new again. It can save you money too. No need to buy a new club. Just fix the old one.
Tools and Materials Needed
You need some tools and materials to reshaft a golf iron. Here is a list:
- Golf shaft
- Epoxy glue
- Grip tape
- Utility knife
- Heat gun
- Shaft extractor
- Golf grip
- Sandpaper
Make sure you have all these items before you start.
Step-by-Step Guide
Step 1: Remove The Old Shaft
First, you need to remove the old shaft. Use a utility knife to cut the grip. Be careful. Do not cut yourself. Peel off the grip. Use the heat gun to heat the shaft. This will loosen the glue. Use the shaft extractor to pull out the old shaft. The old shaft is now removed.
Step 2: Clean The Clubhead
Now, you need to clean the clubhead. Use sandpaper to clean the inside of the clubhead. Remove any old glue. Make sure it is smooth. This will help the new shaft to fit well.
Step 3: Prepare The New Shaft
Next, prepare the new shaft. Check the length of the new shaft. It should be the same as the old one. If it is too long, cut it with a saw. Use sandpaper to smooth the cut end. This will help the glue stick better.
Step 4: Apply Epoxy Glue
Now, it is time to apply the epoxy glue. Mix the epoxy glue as per the instructions. Apply it inside the clubhead. Also, apply it on the end of the new shaft. Do not use too much glue. A little is enough.
Step 5: Insert The New Shaft
Insert the new shaft into the clubhead. Make sure it is straight. Wipe off any extra glue. Let it dry. This may take a few hours. Check the instructions on the epoxy glue for drying time.
Step 6: Attach The New Grip
Once the glue is dry, you can attach the new grip. Apply grip tape to the top of the new shaft. Remove the backing from the tape. Slide the new grip onto the shaft. Make sure it is straight. If needed, use a little water to help slide the grip on.
Tips for Success
Here are some tips to help you:
- Work in a clean area.
- Take your time.
- Read all instructions.
- Wear safety gloves.
- Do not use too much glue.
These tips will help you do a good job.
Frequently Asked Questions
How Do You Remove A Golf Iron Shaft?
Use a heat gun to loosen the epoxy. Twist and pull the shaft out.
What Tools Are Needed To Reshaft A Golf Iron?
You need a heat gun, epoxy, and a shaft extractor. Simple tools.
Can You Reshaft Golf Irons At Home?
Yes, with proper tools and instructions. It’s a DIY-friendly task.
How Long Does It Take To Reshaft A Golf Iron?
Usually, it takes about 30 minutes to an hour.
Conclusion
Reshafting a golf iron is not hard. You can do it yourself. Follow these simple steps. Use the right tools. Take your time. Your golf iron will feel new again. You will save money. You will enjoy your game more. Happy golfing!
Leave a Reply