Electric golf carts are fun to drive. They are quiet and easy to use. But sometimes, they can be slow. This is because they have a speed limiter. The speed limiter keeps the cart from going too fast. But what if you want to go faster? You can remove the speed limiter. This guide will show you how to do it.
Why Remove the Speed Limiter?
There are many reasons to remove the speed limiter. Some people want to get to places faster. Others want more excitement. Removing the speed limiter can make the ride more fun. It can also help when you need to go up hills. A faster cart can climb better.
Things You Will Need
- Screwdriver
- Wrench set
- Wire cutters
- Owner’s manual
- Safety gear
You will need these tools to remove the speed limiter. Make sure you have everything ready. It is also good to have the owner’s manual. The manual will help you find parts and understand the cart better.
Credit: www.awga.golf
Safety First
Always be safe. Wear gloves to protect your hands. Wear goggles to protect your eyes. Work in a safe area. Make sure the cart is turned off. Remove the key from the ignition. This will keep the cart from moving while you work.
Step-by-Step Guide
Follow these steps to remove the speed limiter. Take your time. Do each step carefully.
Step 1: Find The Speed Limiter
The speed limiter is usually near the motor. Look in the manual to find it. It may be a small box or a wire. It is connected to the motor.
Step 2: Remove The Cover
Use a screwdriver to remove the cover. The cover protects the motor and the speed limiter. Be careful not to lose the screws. Put them in a safe place.
Step 3: Disconnect The Wires
There will be wires connected to the speed limiter. Use wire cutters to cut the wires. Be careful not to cut other wires. Only cut the wires connected to the speed limiter.
Step 4: Remove The Speed Limiter
Use a wrench to remove the speed limiter. It may be held by bolts or screws. Remove them and take out the speed limiter. Keep the bolts or screws. You may need them later.
Step 5: Reconnect The Wires
After removing the speed limiter, reconnect the wires. Connect them as they were before. Use wire connectors if needed. Make sure the connections are tight and secure.
Step 6: Replace The Cover
Put the cover back on. Use the screws you saved earlier. Tighten the screws with a screwdriver. Make sure the cover is secure.
Step 7: Test The Cart
Turn on the cart. Test it in a safe area. Drive slowly at first. Make sure everything works. The cart should go faster now. If there are problems, check your work. Make sure all connections are secure.
Enjoy Your Faster Cart
Now your cart should be faster. Enjoy your rides. Remember to drive safely. Do not go too fast. Always follow the rules of the golf course or area you are driving in.
Credit: www.awga.golf
Possible Issues
Removing the speed limiter can cause issues. The cart may use more battery power. It may not be as safe. Always consider these risks before making changes.
Frequently Asked Questions
Why Remove The Speed Limiter On An Electric Golf Cart?
Removing the speed limiter increases the cart’s speed. This can enhance your golf experience.
Is It Legal To Remove The Speed Limiter On A Golf Cart?
Laws vary by location. Check local regulations before making modifications.
Will Removing The Speed Limiter Damage The Golf Cart?
It might strain the motor and reduce battery life. Proceed with caution.
Can I Remove The Speed Limiter Myself?
Yes, but it requires technical skills. Consider consulting a professional.
Conclusion
Removing the speed limiter can make your golf cart faster. It is not too hard to do. Follow the steps in this guide. Always be safe. Enjoy your faster cart.
Leave a Reply